Difference between revisions of "Fatal Error"

From xboxdevwiki
Jump to: navigation, search
m (Fixed typo)
(Added note about lack of error code display in kernel 3944)
 
(4 intermediate revisions by the same user not shown)
Line 1: Line 1:
These are the errors which will be displayed  
+
These are the errors which will be displayed [[File:Fatal_Error_13.png|300px|thumb|right|Fatal Error 13 being displayed]].
 +
 
 +
Kernel version 3944 is the only known official kernel which doesn't show an error code in the corner{{FIXME|reason=Does it still pulse the hardware pin? does it still set error code in the SMC?}}.
 +
 
 +
Checked after cold-boot, in this particular order{{FIXME|reason=We should split this into larger blocks, like HDD initalization, DVD initialization, .. and then explain the steps in each}}:
  
 
{| class="wikitable"
 
{| class="wikitable"
 
!Value (2 digit decimal)
 
!Value (2 digit decimal)
!Meaning
+
!Step / Condition
 +
<!--
 +
 
 +
IDE / Harddive initialization
 +
 
 +
-->
 
|-
 
|-
|0
+
|07
|No error (used internally to clear error flags from EEPROM)
+
|Harddrive never left busy state (after reset from cold-boot)
 
|-
 
|-
|01
+
|09
|
+
|Setting Harddrive PIO mode failed
 
|-
 
|-
|02
+
|09
|EEPROM Checksum failure
+
|Setting Harddrive DMA mode failed
 
|-
 
|-
|03
+
|08
|
+
|Harddrive ATA identify device command failed
 
|-
 
|-
|04
+
|09
|RAM bad
+
|Harddrive is too small for cache partitions
|-
 
|05
 
|Harddrive not locked
 
 
|-
 
|-
 
|06
 
|06
 
|Unable to unlock Harddrive
 
|Unable to unlock Harddrive
 
|-
 
|-
|07
+
|08
|Harddrive unresponsive{{citation needed}}
+
|Harddrive ATA identify device after unlock command failed
 
|-
 
|-
 
|08
 
|08
|Harddrive missing
+
|Setting Harddrive device parameters failed
 +
<!--
 +
 
 +
IDE / DVD Drive initialization
 +
 
 +
-->
 +
|-
 +
|10
 +
|DVD Drive never left busy state (after reset from cold-boot)
 
|-
 
|-
|09
+
|12
|Wrong Harddrive{{citation needed}}
+
|Setting DVD Drive PIO mode failed
 
|-
 
|-
|10
+
|12
|DVD Drive unresponsive
+
|Setting DVD Drive DMA mode failed
 
|-
 
|-
 
|11
 
|11
|DVD Drive missing
+
|DVD Drive ATAPI identify device command failed
 +
<!--
 +
 
 +
XBE Loader
 +
 
 +
-->
 +
|-
 +
|05
 +
|Harddrive not locked; Not reported if either:
 +
* XBE is allowed to run from unlocked HDD
 +
* Xbox is in manufacturing region
 +
* Kernel is made for Chihiro
 +
* Kernel is made for XDK
 +
 
 +
|}
 +
 
 +
Additional error codes, or no precise order known{{FIXME|reason=Figure out the order}}:
 +
 
 +
{| class="wikitable"
 +
!Value (2 digit decimal)
 +
!Generic meaning
 +
|-
 +
|00
 +
|No error (used internally to clear error flags from EEPROM)
 +
|-
 +
|01
 +
|
 
|-
 
|-
|12
+
|02
|Wrong DVD Drive{{citation needed}}
+
|EEPROM Checksum failure
 +
|-
 +
|03
 +
|
 +
|-
 +
|04
 +
|RAM bad
 
|-
 
|-
 
|13
 
|13

Latest revision as of 15:24, 2 November 2018

These are the errors which will be displayed
Fatal Error 13 being displayed
.

Kernel version 3944 is the only known official kernel which doesn't show an error code in the corner[FIXME].

Checked after cold-boot, in this particular order[FIXME]:

Value (2 digit decimal) Step / Condition
07 Harddrive never left busy state (after reset from cold-boot)
09 Setting Harddrive PIO mode failed
09 Setting Harddrive DMA mode failed
08 Harddrive ATA identify device command failed
09 Harddrive is too small for cache partitions
06 Unable to unlock Harddrive
08 Harddrive ATA identify device after unlock command failed
08 Setting Harddrive device parameters failed
10 DVD Drive never left busy state (after reset from cold-boot)
12 Setting DVD Drive PIO mode failed
12 Setting DVD Drive DMA mode failed
11 DVD Drive ATAPI identify device command failed
05 Harddrive not locked; Not reported if either:
  • XBE is allowed to run from unlocked HDD
  • Xbox is in manufacturing region
  • Kernel is made for Chihiro
  • Kernel is made for XDK

Additional error codes, or no precise order known[FIXME]:

Value (2 digit decimal) Generic meaning
00 No error (used internally to clear error flags from EEPROM)
01
02 EEPROM Checksum failure
03
04 RAM bad
13 Dashboard broken, while Kernel/LaunchDataPage reason == 0 (MainMenu)
14 Dashboard broken, while Kernel/LaunchDataPage reason == 1 (Error)
15
16 Dashboard settings error[citation needed]
17
18
19
20 Dashboard failed to launch, but DVD security check was successful
21 Used to manually display fatal error after reboot (on purpose)