Xbox Hard Disk Technical Details
From xboxdevwiki
by Michael Steil (original version: 1 May 2002, updated 26 September 2002)
Seagate (10 GB)
Harddisk information as reported by hdparm -i
Model=ST310211A, FwRev=6.55, SerialNo=6DB2WQW2 Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs RotSpdTol>.5% } RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=0 BuffType=unknown, BuffSize=512kB, MaxMultSect=16, MultSect=16 CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=19541088 IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120} PIO modes: pio0 pio1 pio2 pio3 pio4 DMA modes: mdma0 mdma1 mdma2 udma0 udma1 *udma2 AdvancedPM=no WriteCache=enabled Drive Supports : Reserved : ATA-1 ATA-2 ATA-3 ATA-4
Detailed information as reported by hdparm -I
non-removable ATA device, with non-removable media Model Number: ST310211A Serial Number: 6DB2WQW2 Firmware Revision: 6.55 Standards: Supported: 1 2 3 4 Likely used: 5 Configuration: Logical max current cylinders 16383 16383 heads 16 16 sectors/track 63 63 bytes/track: 0 (obsolete) bytes/sector: 0 (obsolete) current sector capacity: 16514064 LBA user addressable sectors = 19541088 Capabilities: LBA, IORDY(can be disabled) Buffer size: 512.0kB Queue depth: 1 Standby timer values: spec'd by standard r/w multiple sector transfer: Max = 16 Current = 16 DMA: mdma0 mdma1 mdma2 udma0 udma1 *udma2 udma3 udma4 udma5 Cycle time: min=120ns recommended=120ns PIO: pio0 pio1 pio2 pio3 pio4 Cycle time: no flow control=240ns IORDY flow control=120ns Commands/features: Enabled Supported: * READ BUFFER cmd * WRITE BUFFER cmd * Host Protected Area feature set * look-ahead * write cache * Power Management feature set * Security Mode feature set SMART feature set SET MAX security extension * DOWNLOAD MICROCODE cmd Security: supported enabled not locked not frozen not expired: security count not supported: enhanced erase Security level high HW reset results: CBLID- below Vih Device num = 1 Checksum: correct
Hard disk performance measured by hdparm -t
Timing buffered disk reads: 64 MB in 3.51 seconds = 18.23 MB/sec Timing buffer-cache reads: 128 MB in 0.85 seconds =150.59 MB/sec
Western Digital (8 GB)
Harddisk information as reported by hdparm -i
Model=WDC WD80EB-28CGH1, FwRev=24.84G24, SerialNo=*************** Config={ HardSect NotMFM HdSw>15uSec SpinMotCtl Fixed DTR>5Mbs FmtGapReq } RawCHS=15509/16/63, TrkSize=57600, SectSize=600, ECCbytes=40 BuffType=DualPortCache, BuffSize=768kB, MaxMultSect=16, MultSect=off CurCHS=15509/16/63, CurSects=15633072, LBA=yes, LBAsects=15633072 IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120} PIO modes: pio0 pio1 pio2 pio3 pio4 DMA modes: mdma0 mdma1 *mdma2 UDMA modes: udma0 udma1 udma2 udma3 udma4 udma5 AdvancedPM=no WriteCache=enabled Drive conforms to: device does not report version: 1 2 3 4 5
Detailed information as reported by hdparm -I
ATA device, with non-removable media Model Number: WDC WD80EB-28CGH1 Serial Number: *************** Firmware Revision: 24.84G24 Standards: Supported: 5 4 3 2 Likely used: 6 Configuration: Logical max current cylinders 15509 15509 heads 16 16 sectors/track 63 63 -- CHS current addressable sectors: 15633072 LBA user addressable sectors: 15633072 device size with M = 1024*1024: 7633 MBytes device size with M = 1000*1000: 8004 MBytes (8 GB) Capabilities: LBA, IORDY(can be disabled) bytes avail on r/w long: 40 Queue depth: 1 Standby timer values: spec'd by Standard, with device specific minimum R/W multiple sector transfer: Max = 16 Current = 0 Recommended acoustic management value: 128, current value: 254 DMA: mdma0 mdma1 *mdma2 udma0 udma1 udma2 udma3 udma4 udma5 Cycle time: min=120ns recommended=120ns PIO: pio0 pio1 pio2 pio3 pio4 Cycle time: no flow control=120ns IORDY flow control=120ns Commands/features: Enabled Supported: * READ BUFFER cmd * WRITE BUFFER cmd * Host Protected Area feature set * Look-ahead * Write cache * Power Management feature set * Security Mode feature set * SMART feature set Automatic Acoustic Management feature set SET MAX security extension * DOWNLOAD MICROCODE cmd Security: supported enabled not locked not frozen not expired: security count not supported: enhanced erase Security level high HW reset results: CBLID- above Vih Device num = 0 determined by CSEL Checksum: correct
Hard disk performance measured by hdparm -t
Timing buffered disk reads: 64 MB in 6.58 seconds = 9.73 MB/sec Timing buffer-cache reads: 128 MB in 3.28 seconds = 39.02 MB/sec
Retrieved from [1]