EEPROM
From xboxdevwiki
Revision as of 19:08, 25 May 2017 by Mborgerson (talk | contribs)
The Xbox EEPROM is a 256 byte non-volatile storage device which contains device-specific information. It is connected via I²C and located on address 0x54.
The Chihiro EEPROM key is 7B 35 A8 B7 27 ED 43 7A A0 BA FB 8F A4 38 61 80
Contents
Contents
| Start | End | Notes |
|---|---|---|
| 0x00 | 0x13 | HMAC_SHA1 Hash |
| 0x14 | 0x1B | RC4 Encrypted Confounder ?? |
| 0x1C | 0x2B | RC4 Encrypted HDD key |
| 0x2C | 0x2F | RC4 Encrypted Region code (0x01 North America, 0x02 Japan, 0x04 Europe) |
| 0x30 | 0x33 | Checksum of next 44 bytes |
| 0x34 | 0x3F | Xbox serial number |
| 0x40 | 0x45 | Ethernet MAC address |
| 0x46 | 0x47 | Unknown Padding ? |
| 0x48 | 0x57 | Online Key ? |
| 0x58 | 0x5B | ** 0x00014000 = NTSC, 0x00038000 = PAL |
| 0x5C | 0x5F | Unknown Padding ? |
| 0x60 | 0x63 | other Checksum of next |
| 0x64 | 0x67 | Zone Bias? |
| 0x68 | 0x6B | Standard timezone |
| 0x5C | 0x6F | Daylight timezone |
| 0x70 | 0x77 | Unknown Padding ? |
| 0x78 | 0x7B | 10-05-00-02 (Month-Day-DayOfWeek-Hour) |
| 0x7C | 0x7F | 04-01-00-02 (Month-Day-DayOfWeek-Hour) |
| 0x80 | 0x87 | Unknown Padding ? |
| 0x88 | 0x8B | Standard Bias? |
| 0x8C | 0x8F | Daylight Bias? |
| 0x90 | 0x93 | Language ID |
| 0x94 | 0x97 | Video Settings |
| 0x98 | 0x9B | Audio Settings |
| 0x9C | 0x9F | 0=MAX rating |
| 0xA0 | 0xA3 | 7=X, 8=Y, B=LTrigger, C=RTrigger |
| 0xA4 | 0xA7 | 0=Max rating |
| 0xA8 | 0xAB | XBOX Live IP Address.. |
| 0xAC | 0xAF | XBOX Live DNS Server.. |
| 0xB0 | 0xB3 | XBOX Live Gateway Address.. |
| 0xB4 | 0xB7 | XBOX Live Subnet Mask.. |
| 0xA8 | 0xBB | Other XBLive settings ? |
| 0xBC | 0xBF | DVD Playback Kit Zone |
| 0xC0 | 0xFF | Unknown Codes / History ? |
Note: Info in above table comes from XKUtils XKEEPROM.h.
Reading/Writing the EEPROM
Software Method
This is the easiest way to dump an Xbox EEPROM. Use your alternative dashboard to dump the EEPROM to a file and download it over FTP.
Hardware Method
If you cannot dump the EEPROM using software, you can dump it using hardware. You have several options: use an I2C/SPI USB host adapter, build an I2C-Serial cable, or use a device like a RaspberryPi which has an I2C interface already. Connect SDA/SCL/ground to the LPC pinout on the board. See here for pinout information.
