Difference between revisions of "Power Supply"
m (foxlinks love) |
(Removed sentence about PC ATX + reworded) |
||
| Line 1: | Line 1: | ||
It's either a delta electronics power supply or foxlink{{citation needed}} | It's either a delta electronics power supply or foxlink{{citation needed}} | ||
| − | On a 1.0 xbox supply, there seems to be 2 types for the US 120V and EU 240V market. | + | On a 1.0 xbox supply, there seems to be 2{{citation needed|reason=2 per region, or 2 overall?}} types for the US 120V and EU 240V market. |
| − | |||
| − | |||
| − | |||
| − | There is a link J11 under CR1 (right side of the coil under it) that might make the difference between 120V and 240V | + | The marks are on the PCB with a check next to them: |
| − | + | * DPSN-96-AP-1 should be the EU 240V one{{citation needed}} | |
| − | This could make sense as it has to handle double the current. So, before experimenting with this it might be worth to check | + | * DPSN-96-AP is the US 120V one |
| − | if the installed type can handle 2.3 amps. | + | |
| + | There is a link J11 under CR1 (right side of the coil under it) that might make the difference between 120V and 240V. | ||
| + | It also seems that the Bridge rectifier is bigger on the US models. | ||
| + | This could make sense as it has to handle double the current. So, before experimenting with this it might be worth to check if the installed type can handle 2.3 amps. | ||
The rated output currents are also noted on the PCB | The rated output currents are also noted on the PCB | ||
| − | 3V3 Standby 0.075A | + | * 3V3 Standby 0.075A |
| − | 3V3 4.8A | + | * 3V3 4.8A |
| − | 5V 13.2A | + | * 5V 13.2A |
| − | 12V 1.2A | + | * 12V 1.2A |
| − | + | The standby voltage powers the [[SMC]] which handles turning on and off the system. | |
| + | The Xbox supply needs a voltage (3V3?) on it's power-on line to leave the standby mode. | ||
| + | This results in the other voltages being supplied. | ||
Revision as of 15:32, 16 July 2017
It's either a delta electronics power supply or foxlink[citation needed]
On a 1.0 xbox supply, there seems to be 2[citation needed] types for the US 120V and EU 240V market.
The marks are on the PCB with a check next to them:
- DPSN-96-AP-1 should be the EU 240V one[citation needed]
- DPSN-96-AP is the US 120V one
There is a link J11 under CR1 (right side of the coil under it) that might make the difference between 120V and 240V. It also seems that the Bridge rectifier is bigger on the US models. This could make sense as it has to handle double the current. So, before experimenting with this it might be worth to check if the installed type can handle 2.3 amps.
The rated output currents are also noted on the PCB
- 3V3 Standby 0.075A
- 3V3 4.8A
- 5V 13.2A
- 12V 1.2A
The standby voltage powers the SMC which handles turning on and off the system. The Xbox supply needs a voltage (3V3?) on it's power-on line to leave the standby mode. This results in the other voltages being supplied.
Connector pinout
Xbox 1.0 and 1.1
| Pin | Usage |
|---|---|
| Pin 1 | +12V |
| Pin 2 | +5V |
| Pin 3 | +5V |
| Pin 4 | +5V |
| Pin 5 | +3.3V |
| Pin 6 | +3V Standby |
| Pin 7 | GND |
| Pin 8 | GND |
| Pin 9 | GND |
| Pin 10 | GND |
| Pin 11 | POWON |
| Pin 12 | POWOK |
Xbox 1.2 and later
| Pin | Usage |
|---|---|
| Pin 1 | +5V |
| Pin 2 | +5V |
| Pin 3 | +5V |
| Pin 4 | None |
| Pin 5 | GND |
| Pin 6 | None |
| Pin 7 | +3.3V |
| Pin 8 | None |
| Pin 9 | GND |
| Pin 10 | POWOK |
| Pin 11 | +12V |
| Pin 12 | None |
| Pin 13 | +5V |
| Pin 14 | GND |
| Pin 15 | +3V Standby |
| Pin 16 | GND |
| Pin 17 | None |
| Pin 18 | +3.3V |
| Pin 19 | GND |
| Pin 20 | POWON |
