Difference between revisions of "EEPROM"
(→Further Reading) |
KaosEngineer (talk | contribs) (→The HMAC SHA1 Hash: It's not the HMAC HDD Key but the HMAC SHA1 Hash computed across the first 48 bytes which includes the RC4 encrypted HDD Key, etc.) |
||
(49 intermediate revisions by 5 users not shown) | |||
Line 1: | Line 1: | ||
The Xbox EEPROM is a 256 byte non-volatile storage device which contains device-specific information. It is connected via I²C and located on address 0x54. | The Xbox EEPROM is a 256 byte non-volatile storage device which contains device-specific information. It is connected via I²C and located on address 0x54. | ||
Parts of the EEPROM are encrypted using [[Kernel/XboxEEPROMKey]]. | Parts of the EEPROM are encrypted using [[Kernel/XboxEEPROMKey]]. | ||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
== Contents == | == Contents == | ||
Line 33: | Line 21: | ||
| 0x2C | | 0x2C | ||
| 0x2F | | 0x2F | ||
− | | RC4 Encrypted Region code | + | | RC4 Encrypted Region code |
+ | * 0x00000001 = North America | ||
+ | * 0x00000002 = Japan | ||
+ | * 0x00000004 = Europe & Australia | ||
+ | * 0x80000000 = Manufacturing plant | ||
|- | |- | ||
| 0x30 | | 0x30 | ||
| 0x33 | | 0x33 | ||
− | | Checksum of next 44 bytes | + | | Checksum2 - Checksum of next 44 (0x2C) bytes (0x34 - 0x5F)<sup>*</sup> |
|- | |- | ||
| 0x34 | | 0x34 | ||
| 0x3F | | 0x3F | ||
− | | Xbox serial number | + | | Xbox serial number - (ASCII chars 0x30 - 0x39 to match each digit in SN) |
|- | |- | ||
| 0x40 | | 0x40 | ||
| 0x45 | | 0x45 | ||
− | | Ethernet MAC address | + | | Ethernet MAC address (Microsoft Xbox - 00:50:F2:xx:xx:xx) |
+ | This is the MAC address of the Ethernet hardware, which has been [https://web.archive.org/web/20100617020733/http://standards.ieee.org/regauth/oui/oui_public.txt issued by the IEEE]. | ||
|- | |- | ||
| 0x46 | | 0x46 | ||
Line 57: | Line 50: | ||
| 0x58 | | 0x58 | ||
| 0x5B | | 0x5B | ||
− | | | + | | Video Standard |
+ | * 0x00000000 = not set (INVALID) | ||
+ | * 0x00400100 = NTSC-M | ||
+ | * 0x00400200 = NTSC-J | ||
+ | * 0x00800300 = PAL-I | ||
+ | * 0x00400400 = PAL-M | ||
|- | |- | ||
| 0x5C | | 0x5C | ||
Line 65: | Line 63: | ||
| 0x60 | | 0x60 | ||
| 0x63 | | 0x63 | ||
− | | | + | | Checksum3 - Checksum of the next 92 (0x5C) bytes (0x64 - 0xBF)<sup>*</sup> |
|- | |- | ||
| 0x64 | | 0x64 | ||
| 0x67 | | 0x67 | ||
− | | Zone Bias | + | | Zone Bias - Offset in # minutes to subtract from GMT time |
+ | (e.g., for GMT-06 Central; 6hr = 360min = 0x00000168) | ||
|- | |- | ||
| 0x68 | | 0x68 | ||
| 0x6B | | 0x6B | ||
− | | Standard | + | | Standard Timezone Name: 4 characters, NULL fill remainder if shorter (e.g., CST\0, ACST) |
|- | |- | ||
| 0x6C | | 0x6C | ||
| 0x6F | | 0x6F | ||
− | | Daylight | + | | Daylight Timezone Name: 4 characters, NULL fill remainder if shorter (e.g., CDT\0, ACDT) |
|- | |- | ||
| 0x70 | | 0x70 | ||
Line 85: | Line 84: | ||
| 0x78 | | 0x78 | ||
| 0x7B | | 0x7B | ||
− | | 10-05-00-02 (Month-Day-DayOfWeek-Hour) | + | | Standard Time Starts 10-05-00-02 (Month-Day-DayOfWeek-Hour) |
|- | |- | ||
| 0x7C | | 0x7C | ||
| 0x7F | | 0x7F | ||
− | | 04-01-00-02 (Month-Day-DayOfWeek-Hour) | + | | Daylight Savings Time Starts 04-01-00-02 (Month-Day-DayOfWeek-Hour) |
|- | |- | ||
| 0x80 | | 0x80 | ||
Line 97: | Line 96: | ||
| 0x88 | | 0x88 | ||
| 0x8B | | 0x8B | ||
− | | Standard Bias | + | | Standard Timezone Bias; if not DST, 0 (0x00000000) minute time adjust |
|- | |- | ||
| 0x8C | | 0x8C | ||
| 0x8F | | 0x8F | ||
− | | Daylight Bias | + | | Daylight Savings Time Bias; if DST, -60 (0xFFFFFFC4) minute time adjust |
|- | |- | ||
| 0x90 | | 0x90 | ||
| 0x93 | | 0x93 | ||
− | | Language ID | + | | Language ID (0 = not set) |
+ | * 0x00000001 = English | ||
+ | * 0x00000002 = Japanese | ||
+ | * 0x00000003 = German | ||
+ | * 0x00000004 = French | ||
+ | * 0x00000005 = Spanish | ||
+ | * 0x00000006 = Italian | ||
+ | * 0x00000007 = Korean | ||
+ | * 0x00000008 = Chinese | ||
+ | * 0x00000009 = Portuguese | ||
|- | |- | ||
| 0x94 | | 0x94 | ||
| 0x97 | | 0x97 | ||
| Video Settings | | Video Settings | ||
+ | * 0x00080000 = 480p | ||
+ | * 0x00020000 = 720p | ||
+ | * 0x00040000 = 1080i | ||
+ | |||
+ | * 0x00010000 = Widescreen{{FIXME|reason=What happens if Widescreen and letterbox are enabled at the same time? Can this happen?}} | ||
+ | * 0x00100000 = Letterbox{{FIXME|reason=What happens if Widescreen and letterbox are enabled at the same time? Can this happen?}} | ||
+ | |||
+ | * 0x00400000 = 60Hz{{FIXME|reason=Unconfirmed; Also, what happens if both refresh rates are disabled?}} | ||
+ | * 0x00800000 = 50Hz{{FIXME|reason=Unconfirmed; Also, what happens if both refresh rates are disabled?}} | ||
|- | |- | ||
| 0x98 | | 0x98 | ||
| 0x9B | | 0x9B | ||
| Audio Settings | | Audio Settings | ||
+ | * 0x00000000 = Stereo | ||
+ | * 0x00000001 = Mono | ||
+ | * 0x00000002 = Surround | ||
+ | * 0x00010000 = Enable AC3 | ||
+ | * 0x00020000 = Enable DTS | ||
|- | |- | ||
| 0x9C | | 0x9C | ||
| 0x9F | | 0x9F | ||
− | | 0= | + | | Games Parental Control (0 = Max rating) |
+ | * 0x00000000 = Rating Pending (RP) | ||
+ | * 0x00000001 = Adults Only (AO) | ||
+ | * 0x00000002 = Mature (M) | ||
+ | * 0x00000003 = Teen (T) | ||
+ | * 0x00000004 = Everyone (E) | ||
+ | * 0x00000005 = Kids to Adults (K-A) | ||
+ | * 0x00000006 = Early Childhood (EC) | ||
|- | |- | ||
| 0xA0 | | 0xA0 | ||
| 0xA3 | | 0xA3 | ||
− | | | + | | Parental Control Passcode; 4 button sequence (each key stored in a nibble) |
+ | * 0x1 = {{input-dy+}} or {{input-ly+}} | ||
+ | * 0x2 = {{input-dy-}} or {{input-ly-}} | ||
+ | * 0x3 = {{input-dx-}} or {{input-lx-}} | ||
+ | * 0x4 = {{input-dx+}} or {{input-lx+}} | ||
+ | * 0x5 = {{input-a}} | ||
+ | * 0x6 = {{input-b}} | ||
+ | * 0x7 = {{input-x}} | ||
+ | * 0x8 = {{input-y}} | ||
+ | * 0xB = {{input-lt}} | ||
+ | * 0xC = {{input-rt}} | ||
+ | * 0x0 = Disabled{{FIXME|reason=Is this 0x00000000 only, or are shorter codes possible? can a middle section be 0x00 or would that end the sequence?}} | ||
+ | |||
+ | ''Note'': | ||
+ | * A passcode 0x00001423 is D-pad directions up (0x1), right (0x4), down (0x2), left (0x3). | ||
+ | * Pass code only uses the lower 16 bits; each button is stored as a nibble in the word. First button in the most significant nibble and last in the least significant nibble. | ||
|- | |- | ||
| 0xA4 | | 0xA4 | ||
| 0xA7 | | 0xA7 | ||
− | | 0=Max rating | + | | Movies Parental Control (0 = Max rating) |
− | |- | + | * 0x00000001 = Adults Only (NC-17) |
+ | * 0x00000002 = Restricted (R) | ||
+ | * 0x00000004 = Parents Strongly Cautioned (PG-13) | ||
+ | * 0x00000005 = Parental Guidance Suggested (PG) | ||
+ | * 0x00000007 = General Audiences (G) | ||
+ | |- | ||
| 0xA8 | | 0xA8 | ||
| 0xAB | | 0xAB | ||
Line 143: | Line 192: | ||
| XBOX Live Subnet Mask.. | | XBOX Live Subnet Mask.. | ||
|- | |- | ||
− | | | + | | 0xB8 |
| 0xBB | | 0xBB | ||
| Other XBLive settings ? | | Other XBLive settings ? | ||
Line 150: | Line 199: | ||
| 0xBF | | 0xBF | ||
| DVD Playback Kit Zone | | DVD Playback Kit Zone | ||
+ | * 0x00000000 = None | ||
+ | * 0x00000001 = Region 1 | ||
+ | * ... | ||
+ | * 0x00000006 = Region 6{{FIXME|reason=We should document which regions were actually sold in stores}} | ||
|- | |- | ||
| 0xC0 | | 0xC0 | ||
| 0xFF | | 0xFF | ||
− | | Unknown Codes / History ? | + | | Unknown Codes / History ? do not change any values in this range |
|- | |- | ||
|} | |} | ||
Note: Info in above table comes from XKUtils [https://svn.exotica.org.uk:8443/xbmc4xbox/tags/3.5.3/xbmc/xbox/XKEEPROM.h XKEEPROM.h]. | Note: Info in above table comes from XKUtils [https://svn.exotica.org.uk:8443/xbmc4xbox/tags/3.5.3/xbmc/xbox/XKEEPROM.h XKEEPROM.h]. | ||
+ | |||
+ | <sup>*</sup>Configmagic-FINAL-1.6 uses the wrong size when computing Checksum2 (40 instead of 44 bytes) and Checksum3 (96 instead of 92 bytes). Checksum2 value computed was correct only because the extra 4 bytes not used in the CRC computation were all 0's which does not change the CRC value. However, a similiar problem with computation of Checksum3 is present. The CRC computed for v1.6 Xbox's is incorrect as the 4 extra bytes are not 0's as on earlier versions. | ||
== Reading/Writing the EEPROM == | == Reading/Writing the EEPROM == | ||
Line 168: | Line 223: | ||
or [https://www.totalphase.com/products/aardvark-i2cspi/ here]), build an [https://www.youtube.com/watch?v=UcK6nKyKGVQ I2C-Serial cable], or use a device like a RaspberryPi which has an I2C interface. Connect SDA/SCL/ground to the LPC pinout on the board. See [https://github.com/grimdoomer/PiPROM here] for pinout information. Then use the corresponding software to read/write the EEPROM. | or [https://www.totalphase.com/products/aardvark-i2cspi/ here]), build an [https://www.youtube.com/watch?v=UcK6nKyKGVQ I2C-Serial cable], or use a device like a RaspberryPi which has an I2C interface. Connect SDA/SCL/ground to the LPC pinout on the board. See [https://github.com/grimdoomer/PiPROM here] for pinout information. Then use the corresponding software to read/write the EEPROM. | ||
+ | == The HMAC SHA1 Hash == | ||
− | + | The HMAC SHA1 Hash is generated{{FIXME|reason=Stored? Derived? At factory?}} out of the first 48 bytes{{FIXME|reason=..first 48 EEPROM bytes? Encrypted / Decrypted?}}. This section has been identified clearly{{FIXME|reason=What does this mean?}}. | |
− | |||
− | The HMAC | ||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | {| | ||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
== Checksum Algorithm == | == Checksum Algorithm == | ||
Line 242: | Line 237: | ||
* Rewritten to ANSI C by David Pye (dmp@davidmpye.dyndns.org) | * Rewritten to ANSI C by David Pye (dmp@davidmpye.dyndns.org) | ||
* | * | ||
− | * | + | * Adapted for XboxDevWiki |
− | + | */ | |
− | + | uint32_t EepromCRC(unsigned char *data, long dataLen) { | |
− | + | ||
− | + | // Initialize result to zero | |
+ | uint8_t crc[4] = { 0x00, 0x00, 0x00, 0x00 }; | ||
− | |||
//Circle shift input data one byte right | //Circle shift input data one byte right | ||
− | memcpy(CRC_Data + 0x01 , data, dataLen-1); | + | unsigned char* CRC_Data = (unsigned char *)malloc(dataLen + 4); |
− | memcpy(CRC_Data, data + dataLen-1, 0x01); | + | memset(CRC_Data, 0x00, dataLen + 4); |
+ | memcpy(CRC_Data + 0x01 , data, dataLen - 1); | ||
+ | memcpy(CRC_Data, data + dataLen - 1, 0x01); | ||
− | for ( | + | // Calculate checksum |
+ | for (unsigned int i = 0; i < 4; i++) { | ||
unsigned short CRCPosVal = 0xFFFF; | unsigned short CRCPosVal = 0xFFFF; | ||
− | unsigned long | + | for (unsigned long l = i; l < dataLen; l += 4) { |
− | |||
CRCPosVal -= *(unsigned short*)(&CRC_Data[l]); | CRCPosVal -= *(unsigned short*)(&CRC_Data[l]); | ||
} | } | ||
− | CRCPosVal & | + | CRCPosVal &= 0xFF00; |
− | crc[ | + | crc[i] = (unsigned char) (CRCPosVal >> 8); |
} | } | ||
+ | |||
free(CRC_Data); | free(CRC_Data); | ||
+ | |||
+ | return *(uint32_t*)&crc; | ||
} | } | ||
</pre> | </pre> | ||
+ | == Read Checksum Algorithm == | ||
+ | |||
+ | When the Xbox reads from the FACTORY_SETTINGS or the USER_SETTINGS section of the EEPROM, this algorithm is ran over the entire section accessed (including the CRC checksum mentioned above) to ensure that the data is valid. If the result of the checksum algorithm does not equal 0xFFFFFFFF, STATUS_DEVICE_DATA_ERROR is returned from the Kernel. | ||
+ | |||
+ | <pre>static uint32_t eeprom_section_checksum( | ||
+ | const uint32_t* section_data, | ||
+ | uint32_t section_data_length | ||
+ | ) | ||
+ | { | ||
+ | const uint32_t bitmask = 0xFFFFFFFF; | ||
+ | uint64_t checksum = 0; | ||
+ | uint32_t carry_count = 0; | ||
+ | |||
+ | // Process the data in 32 bit steps | ||
+ | for(unsigned int i = 0; i < section_data_length / 4; i++) { | ||
+ | checksum += *section_data; | ||
+ | if(checksum > bitmask) { | ||
+ | carry_count++; | ||
+ | checksum &= bitmask; | ||
+ | } | ||
+ | section_data++; | ||
+ | } | ||
+ | checksum += carry_count; | ||
+ | if(checksum > bitmask) { | ||
+ | checksum += 1; | ||
+ | } | ||
+ | return (uint32_t)(checksum & bitmask); | ||
+ | } | ||
+ | </pre> | ||
== Further Reading == | == Further Reading == | ||
* [https://web.archive.org/web/20040604013125/http://console-dev.com:80/eeprom.htm Information about EEPROM contents] | * [https://web.archive.org/web/20040604013125/http://console-dev.com:80/eeprom.htm Information about EEPROM contents] | ||
− | * [https://github.com/grimdoomer/PiPROM Read/Write an original Xbox EEPROM chip | + | * [https://github.com/grimdoomer/PiPROM Read/Write an original Xbox EEPROM chip using a Raspberry Pi] |
+ | * [https://mehmedbasic.dk/post/xbox-eeprom/ Read/Write an original Xbox EEPROM using a VGA port] | ||
* [https://www.youtube.com/watch?v=UcK6nKyKGVQ How To Make Xbox EEPROM Reader / Write (Video)] | * [https://www.youtube.com/watch?v=UcK6nKyKGVQ How To Make Xbox EEPROM Reader / Write (Video)] | ||
* [https://www.youtube.com/watch?v=uzrljlHDr9w How To Extract Xbox EEPROM Easy (Video)] | * [https://www.youtube.com/watch?v=uzrljlHDr9w How To Extract Xbox EEPROM Easy (Video)] |
Latest revision as of 01:22, 20 August 2020
The Xbox EEPROM is a 256 byte non-volatile storage device which contains device-specific information. It is connected via I²C and located on address 0x54. Parts of the EEPROM are encrypted using Kernel/XboxEEPROMKey.
Contents
Contents
Start | End | Notes |
---|---|---|
0x00 | 0x13 | HMAC_SHA1 Hash |
0x14 | 0x1B | RC4 Encrypted Confounder ?? |
0x1C | 0x2B | RC4 Encrypted HDD key |
0x2C | 0x2F | RC4 Encrypted Region code
|
0x30 | 0x33 | Checksum2 - Checksum of next 44 (0x2C) bytes (0x34 - 0x5F)* |
0x34 | 0x3F | Xbox serial number - (ASCII chars 0x30 - 0x39 to match each digit in SN) |
0x40 | 0x45 | Ethernet MAC address (Microsoft Xbox - 00:50:F2:xx:xx:xx)
This is the MAC address of the Ethernet hardware, which has been issued by the IEEE. |
0x46 | 0x47 | Unknown Padding ? |
0x48 | 0x57 | Online Key ? |
0x58 | 0x5B | Video Standard
|
0x5C | 0x5F | Unknown Padding ? |
0x60 | 0x63 | Checksum3 - Checksum of the next 92 (0x5C) bytes (0x64 - 0xBF)* |
0x64 | 0x67 | Zone Bias - Offset in # minutes to subtract from GMT time
(e.g., for GMT-06 Central; 6hr = 360min = 0x00000168) |
0x68 | 0x6B | Standard Timezone Name: 4 characters, NULL fill remainder if shorter (e.g., CST\0, ACST) |
0x6C | 0x6F | Daylight Timezone Name: 4 characters, NULL fill remainder if shorter (e.g., CDT\0, ACDT) |
0x70 | 0x77 | Unknown Padding ? |
0x78 | 0x7B | Standard Time Starts 10-05-00-02 (Month-Day-DayOfWeek-Hour) |
0x7C | 0x7F | Daylight Savings Time Starts 04-01-00-02 (Month-Day-DayOfWeek-Hour) |
0x80 | 0x87 | Unknown Padding ? |
0x88 | 0x8B | Standard Timezone Bias; if not DST, 0 (0x00000000) minute time adjust |
0x8C | 0x8F | Daylight Savings Time Bias; if DST, -60 (0xFFFFFFC4) minute time adjust |
0x90 | 0x93 | Language ID (0 = not set)
|
0x94 | 0x97 | Video Settings
|
0x98 | 0x9B | Audio Settings
|
0x9C | 0x9F | Games Parental Control (0 = Max rating)
|
0xA0 | 0xA3 | Parental Control Passcode; 4 button sequence (each key stored in a nibble)
Note:
|
0xA4 | 0xA7 | Movies Parental Control (0 = Max rating)
|
0xA8 | 0xAB | XBOX Live IP Address.. |
0xAC | 0xAF | XBOX Live DNS Server.. |
0xB0 | 0xB3 | XBOX Live Gateway Address.. |
0xB4 | 0xB7 | XBOX Live Subnet Mask.. |
0xB8 | 0xBB | Other XBLive settings ? |
0xBC | 0xBF | DVD Playback Kit Zone
|
0xC0 | 0xFF | Unknown Codes / History ? do not change any values in this range |
Note: Info in above table comes from XKUtils XKEEPROM.h.
*Configmagic-FINAL-1.6 uses the wrong size when computing Checksum2 (40 instead of 44 bytes) and Checksum3 (96 instead of 92 bytes). Checksum2 value computed was correct only because the extra 4 bytes not used in the CRC computation were all 0's which does not change the CRC value. However, a similiar problem with computation of Checksum3 is present. The CRC computed for v1.6 Xbox's is incorrect as the 4 extra bytes are not 0's as on earlier versions.
Reading/Writing the EEPROM
Software Method
This is the easiest way to dump an Xbox EEPROM. Use your alternative dashboard to dump the EEPROM to a file and download it over FTP.
Hardware Method
If you cannot dump the EEPROM using software, you can dump it using hardware. You have several options: use an I2C host adapter (see here or here), build an I2C-Serial cable, or use a device like a RaspberryPi which has an I2C interface. Connect SDA/SCL/ground to the LPC pinout on the board. See here for pinout information. Then use the corresponding software to read/write the EEPROM.
The HMAC SHA1 Hash
The HMAC SHA1 Hash is generated[FIXME] out of the first 48 bytes[FIXME]. This section has been identified clearly[FIXME].
Checksum Algorithm
Checksum2 and Checksum3 values can be calculated by running the following code snippet over the area the checksum covers:
/* The EepromCRC algorithm was obtained from the XKUtils 0.2 source released by * TeamAssembly under the GNU GPL. * Specifically, from XKCRC.cpp * * Rewritten to ANSI C by David Pye (dmp@davidmpye.dyndns.org) * * Adapted for XboxDevWiki */ uint32_t EepromCRC(unsigned char *data, long dataLen) { // Initialize result to zero uint8_t crc[4] = { 0x00, 0x00, 0x00, 0x00 }; //Circle shift input data one byte right unsigned char* CRC_Data = (unsigned char *)malloc(dataLen + 4); memset(CRC_Data, 0x00, dataLen + 4); memcpy(CRC_Data + 0x01 , data, dataLen - 1); memcpy(CRC_Data, data + dataLen - 1, 0x01); // Calculate checksum for (unsigned int i = 0; i < 4; i++) { unsigned short CRCPosVal = 0xFFFF; for (unsigned long l = i; l < dataLen; l += 4) { CRCPosVal -= *(unsigned short*)(&CRC_Data[l]); } CRCPosVal &= 0xFF00; crc[i] = (unsigned char) (CRCPosVal >> 8); } free(CRC_Data); return *(uint32_t*)&crc; }
Read Checksum Algorithm
When the Xbox reads from the FACTORY_SETTINGS or the USER_SETTINGS section of the EEPROM, this algorithm is ran over the entire section accessed (including the CRC checksum mentioned above) to ensure that the data is valid. If the result of the checksum algorithm does not equal 0xFFFFFFFF, STATUS_DEVICE_DATA_ERROR is returned from the Kernel.
static uint32_t eeprom_section_checksum( const uint32_t* section_data, uint32_t section_data_length ) { const uint32_t bitmask = 0xFFFFFFFF; uint64_t checksum = 0; uint32_t carry_count = 0; // Process the data in 32 bit steps for(unsigned int i = 0; i < section_data_length / 4; i++) { checksum += *section_data; if(checksum > bitmask) { carry_count++; checksum &= bitmask; } section_data++; } checksum += carry_count; if(checksum > bitmask) { checksum += 1; } return (uint32_t)(checksum & bitmask); }