Difference between revisions of "APU"

From xboxdevwiki
Jump to: navigation, search
(Encode Processor (EP))
(The 48kHz samplerate is a key-design feature. The 32 sample length is a key-design feature. The 1500Hz (~1/0.666ms) is derived from said features.)
 
(39 intermediate revisions by 3 users not shown)
Line 1: Line 1:
 
The [[MCPX]] contains an APU (Audio Processing Unit).
 
The [[MCPX]] contains an APU (Audio Processing Unit).
  
 +
The APU consists of 3 main components for audio-processing:
 +
 +
* VP: A fixed-function block, that generates 32 channel mono audio from voices; the audio is output to the GP MIXBUF.
 +
* GP: A programmable DSP, it is intended for general-purpose audio processing (programmable audio effects for example).
 +
* EP: A programmable DSP, it is intended for audio encoding (5.1 AC3 encoding for example).
 +
 +
VP and GP are connected by the MIXBUF, but GP and EP are entirely independent, and no special-purpose memory area connects them.
 +
Therefore, the  communication between the GP and EP typically happens through programmable DMA transfers (via FIFO or scratch memory).
 +
 +
The GP and EP are based on the same DSP architecture, run at the same clockrate, and have the same functionality (the EP has less memory, and no direct access to the MIXBUF). So, theoretically, nothing prevents the GP from doing EP tasks or vice versa{{FIXME|reason=I have not seen counter-arguments}}.
 +
 +
The APU does only audio-processing but no audio output. Hence, one of the DSPs typically uses programmable DMA to transfer the finished audio to system memory, where it can be read by other components (such as AC97).
 +
 +
All audio processing by the APU is typically done in 24bit PCM at 48000Hz.
 +
An APU audio frame is 32 samples long. Therefore, there are 1500 frames per second, with a duration of 0.{{overline|6}}ms each.
 +
The MIXBUF holds 1024 samples (32 channels * 32 samples/channel).
 +
 +
=== Glossary ===
 +
 +
* PRD = Physical Resource Descriptor (Same thing as SGE?!)
 +
* SGE = Scatter Gather Entry
 
* SSL = Stream Segment List
 
* SSL = Stream Segment List
* SGE = Scatter Gather Entry
+
 
* PRD = Physical Resource Descriptor (Same thing as SGE?!)
+
== Frontend Engine (FE) ==
  
 
== Voice Processor (VP) ==
 
== Voice Processor (VP) ==
  
A powerful voice processor. There can be up to 256 voices{{citation needed}} and 64{{citation needed}} of those can be 3D.
+
A powerful voice processor. There can be up to 256 voices [http://www.gamasutra.com/blogs/BrianSchmidt/20111117/90625/Designing_the_Boot_Sound_for_the_Original_Xbox.php][https://web.archive.org/web/20010410003338/http://www.nvnews.net/previews/mcpx/mcpx.shtml] and 64[http://www.nvidia.com/object/IO_20010530_6177.html] of those can be 3D.
  
 
Per-voice settings:
 
Per-voice settings:
 
* Input type (8bit, 16bit, 24bit, ADPCM)
 
* Input type (8bit, 16bit, 24bit, ADPCM)
 +
* 8 target bins, each with controllable volume for this voice
 
* [[wikipedia:Head-related transfer function|Head-related transfer function]] (HRTF)
 
* [[wikipedia:Head-related transfer function|Head-related transfer function]] (HRTF)
 
* [[wikipedia:Low-frequency oscillation|Low-frequency oscillation]] (LFO)
 
* [[wikipedia:Low-frequency oscillation|Low-frequency oscillation]] (LFO)
* Pitch
+
* Pitch (~187.5 Hz to ~12285920.7 Hz)
* 2x Pitch (?) envelope
+
* Optionally one of the following filters modes:
* 2x LFO (?) envelope
+
** For 2D Mono:
* 8 target bins, each with a custom volume for this voice
+
*** DLS2 Low-Pass
 +
*** Parametric Equalizer
 +
*** DLS2 Low-Pass + Parametric Equalizer
 +
** For 2D Stereo:
 +
*** DLS2 Low-Pass
 +
*** Parametric Equalizer
 +
** For 3D:
 +
*** DLS2 Low-Pass + I3DL2 Reverb
 +
*** Parametric Equalizer + I3DL2 Reverb
 +
*** I3DL2 Reverb
 +
* 2 Envelopes (DAHDSR: Delay, Attack, Hold, Decay, Sustain, Release)
 +
** Amplitude Envelope
 +
** Pitch / DLS2 Low-Pass Cutoff Envelope
 +
* Tracking of certain parameters
 +
** Volume
 +
** LFO parameters
 +
** DLS2 Low-Pass parameters?{{FIXME|reason=Not 100% sure, also not sure if this also works for the other filters}}
  
 
There are 32 bins which these voices will be mixed into.
 
There are 32 bins which these voices will be mixed into.
Line 48: Line 86:
 
f = pow2(p / 4096) * 48000
 
f = pow2(p / 4096) * 48000
 
</pre>
 
</pre>
 +
 +
=== LFO ===
 +
 +
=== Tracking ===
 +
 +
Some of the parameters of the VP can be controlled by setting timing parameters.
 +
New values will then be slowly be adapted over time.
 +
{{FIXME}}
 +
 +
=== Envelopes ===
 +
 +
There are seperate segments of the envelopes, 2 registers (CUR and COUNT) per envelope keeps track of this and control the envelopes level (LVL):
 +
 +
* 0: Off = Envelope is not used
 +
* 1: Delay = Time where envelope stays at 0% until attack
 +
** COUNT register counts down from DELAYTIME.
 +
* 2: Attack = Rate at which the envelope goes from 0 to 100%
 +
** COUNT register counts up to ATTACKRATE.
 +
** LVL seems to be linear.
 +
* 3: Hold = Time the envelope stays at 100%
 +
** COUNT register counts down from HOLDTIME.
 +
* 4: Decay = Rate at which the envelope goes from 100% to 0%
 +
** COUNT register counts down from DECAYRATE.
 +
** The LVL is not linear, it's a curve which drops steep at first and then slowly becomes level[https://docs.google.com/spreadsheets/d/1fNsfkvBfnlRQ9XplNnTgmh8jBaWJ56bvh2AVWn8B_k0/edit?usp=sharing]
 +
** The best approximation I could come up with so far is: <code>255*pow(0.99988799,(DECAYRATE*16-COUNT)*4096/DECAYRATE)</code>.
 +
** When the output level (not LVL!) reaches the sustain level the decay section is over (In my example above, this happens when the output level is less than 0.2 away from the sustain level; so if sustain is 0, the voice would switch to the sustain segment when a value below 0.2 is reached)
 +
** Writes to the LVL register are ignored
 +
** Writes to count (any value?) impact the LVL
 +
** If the COUNT is larger than the decayrate the envelope will switch to the sustain state
 +
** If the COUNT results in a smaller output level than the sustainlevel the envelope will switch to the sustain state
 +
* 5: Sustain = Level at which the envelope stays while the voice is being played
 +
** COUNT register writes are ignored, it will stay at 0
 +
** LVL register writes are ignored, it will stay at the current sustain level
 +
* 6: Release = Rate at which the envelope goes from current level to 0%
 +
** Can start at any time{{FIXME|reason=the voice state PERSIST has to do with this. Voice is released using NV1BA0_PIO_VOICE_RELEASE ?}}
 +
** COUNT register starts at RELEASERATE, regardless of the current sustain level
 +
** COUNT register counts down{{FIXME|reason=What happens when it reaches 0? DirectSound seems to turn off voice - or is the hw doing that?}}
 +
** LVL is not updated during this phase (it will keep it's previous value)
 +
** Writes to LVL have an impact on the output volume
 +
** If the COUNT register is higher than the releaserate, the output will be silent and LVL will drop to zero
 +
** The actual output level is probably determined like: <code>int(COUNT * LVL / (RELEASERATE * 16))</code>{{FIXME|reason=Test..}}{{FIXME|reason=Unknown output shape}}
 +
** COUNT will keep counting until 0 even after the output level has hit 0
 +
* 7: Force Release = Unknown still{{FIXME}}
 +
** Seems to happen during invalid conditions? Happened to me when modifying ebo during playback{{citation needed|reason=Need to find out why this happens}}
 +
** LVL and COUNT seem to be ignored during this, but writes go through? Output level seems to stay at 100% ? (I only got repeating 32 samples during this and the whole Xbox crashed shortly after)
 +
 +
All durations are described using unsigned 12-bit times/rates. The level of sustain is stored unsigned in 8-bit.
 +
The COUNT register is stored in unsigned 16-bit.
 +
 +
The 12-bit times/rates are multiplied by 16 when loading them into the 16-bit COUNT register.
 +
The COUNT register counts at 1500 Hz[https://docs.google.com/spreadsheets/d/11jxeJ9aey_TVkyiMmmd6SKuow4j4GR9E9fRZ6HXc2WU/edit#gid=396423867].
 +
A unit in the COUNT register is therefore 0.{{overline|6}} ms.
 +
 +
The 12-bit values of the envelope sections are given in units of 0.{{overline|6}} ms * 16 = 10.{{overline|6}} ms.
 +
This can also be written as 512 / (48000 Hz) = 10.{{overline|6}} ms.
 +
The maximum length of an envelope section is therefore 4095 * 10.{{overline|6}} ms = 43.68 seconds.
 +
 +
As the envelope counter runs at a fixed clock speed, it is independent of the voice pitch and duration.
 +
 +
If the Amplitude Envelope COUNT hits 0 during release, DirectSound{{FIXME|reason=Is this a hardware thing? I guess it makes sense..}} already deletes the voice, regardless of the Filter Envelope.
 +
 +
The sustain level can be changed during playback.
 +
Also the attack register can be changed to a lower value while the counter is counting up, however, if the COUNTER does not compare equal to the set value, it will keep counting, even after an overflow. It will not leave the attack phase and keep counting until it sees value COUNTER / 16 in the attack register. If the attack register is set to a higher value while counting, the volume is going down again.
 +
Also, if the attack register value is zero while counting, there won't be any audio output during the attack phase.
 +
This indicates that the COUNT register is used to calculate the actual value from the current rates.
 +
 +
The initial state of each envelope can be controlled by the NV1BA0_PIO_VOICE_ON command. It can either be: DISABLE, DELAY, ATTACK or HOLD.
 +
 +
==== Amplitude Envelope ====
 +
 +
The amplitude envelope is mixed with the volume during mixing. The volume registers are not modified.
 +
{{FIXME|reason=Is it multiplied on? Is it added? subtracted?}}
 +
It is not yet known how many bits of the envelope state are used.
 +
 +
==== Filter Envelope ====
 +
 +
{{FIXME|reason=Research}}
 +
 +
The pitch scale is multiplied with the current envelope state and added to the current pitch during mixing. The pitch registers are not modified.
 +
 +
<pre>
 +
f = 2^((signed_pitch+signed_pitch_mod*32*envelope_state_float)/4096)*48000 # envelope_state_float: [0, 1]
 +
</pre>
 +
 +
It is not yet known how many bits of the envelope state are used.
 +
 +
=== Filters ===
 +
 +
==== DLS2 ====
 +
 +
Formulas from DirectSound
 +
 +
<pre>
 +
FreqToHardwareCoeff(frequency): # Input in Hz
 +
  if (frequency < 30) { return 0x8000 }
 +
  if (frequency > 8000) { return 0x0000 }
 +
  FC = 2 * sin(PI * frequency / 48000)
 +
  octaves = 4096 * log2(FC)
 +
  return octaves & 0xFFFF
 +
hardware_coefficient[0] = FreqToHardwareCoeff(frequency)
 +
</pre>
 +
 +
<pre>
 +
dBToHardwareCoeff(resonance): # Input in dB
 +
  resonance = min(resonance, 22.5)
 +
  Q = pow(10, -0.05 * resonance)
 +
  return min(0xFFFF)
 +
hardware_coefficient[1] = dBToHardwareCoeff(resonance_in_db)
 +
</pre>
 +
 +
 +
Stuff from the DLS2 spec:{{FIXME|reason=Untested / unconfirmed. Most info comes from Merry of Citra}}
 +
 +
There are 2 coeffiecents per channel:
 +
 +
* F_c (Cutoff frequency)
 +
* resonance
 +
 +
From Page 8 of "DLS 2.2 Version 1.0"[https://www.midi.org/specifications/item/dls-level-2-specification]
 +
 +
* b_1 = -2 * r * cos(θ)
 +
* b_2 = r * r
 +
* K =  g * (1 + b_1 + b_2)
 +
 +
<pre>
 +
y[i] = K * x[i] - b_1 * y[i-1] - b_2 * y[i-2]
 +
</pre>
 +
 +
Where y[i-2] and y[i-1] are the last two frames of the output and x[i] the current input.
  
 
=== Operation ===
 
=== Operation ===
Line 57: Line 224:
 
== Global Processor (GP) ==
 
== Global Processor (GP) ==
  
The GP runs all enabled sound effects on the voice bins.
+
The GP is a DSP to do programmable audio processing on the voice bins.
  
The GP DSP seems to run at 160 MHz
+
The GP DSP seems to run at 160 MHz.
  
 
=== MIXBUF ===
 
=== MIXBUF ===
Line 90: Line 257:
  
 
The bins are used {{FIXME|reason=How?}}
 
The bins are used {{FIXME|reason=How?}}
DirectSound allows to load custom GP DSP code for filter / effects.
+
DirectSound allows to load custom GP DSP code for a filter / effects chain.
 
{{FIXME|reaon=Will GP DSP automatically download code or is code pushed to it?}}
 
{{FIXME|reaon=Will GP DSP automatically download code or is code pushed to it?}}
The GP waits for the frame interrupt which signals that MIXBUF data is available. It then goes through a filter chain.
+
The GP waits for the frame interrupt which signals that MIXBUF data is available. It then goes through the filter chain.
 
At the end of the chain, the GP DSP will verify that the execution didn't take longer than the frame duration.
 
At the end of the chain, the GP DSP will verify that the execution didn't take longer than the frame duration.
  
Line 113: Line 280:
 
{{FIXME|reason=When does this happen and what happens to stereo? headphones? mono?}}
 
{{FIXME|reason=When does this happen and what happens to stereo? headphones? mono?}}
 
The data is then send to the ACI AC97 using EP FIFO channels 0 (PCM) and 1 (SPDIF){{citation needed}}.
 
The data is then send to the ACI AC97 using EP FIFO channels 0 (PCM) and 1 (SPDIF){{citation needed}}.
 +
The EP code is loaded by DirectSound. The EP is not programmable using DirectSound APIs.
  
 
=== Modifications for Boot Animation ===
 
=== Modifications for Boot Animation ===
Line 121: Line 289:
 
There is no AC3 / SPDIF during the boot animation[http://www.gamasutra.com/blogs/BrianSchmidt/20111117/90625/Designing_the_Boot_Sound_for_the_Original_Xbox.php]{{citation needed|reason=Link to brians gamasutra stuff}}.
 
There is no AC3 / SPDIF during the boot animation[http://www.gamasutra.com/blogs/BrianSchmidt/20111117/90625/Designing_the_Boot_Sound_for_the_Original_Xbox.php]{{citation needed|reason=Link to brians gamasutra stuff}}.
  
== Related ==
+
== Related notes ==
  
 
* [[ACI]]
 
* [[ACI]]
 
* [[DSP]]
 
* [[DSP]]
 
* [[Xbox ADPCM]]
 
* [[Xbox ADPCM]]
* [https://github.com/JayFoxRox/xbox-tools/blob/master/python-scripts/apu.py Script to inspect APU registers and voice buffers]
+
* [http://www.nvidia.com/object/apu.html Information at NVIDIAs website]
 +
* [http://www.nvidia.com/attach/9004 "Technical Brief: NVIDIA nForce MCP Audio Processing Unit" by NVIDIA]
 +
* [https://github.com/JayFoxRox/xbox-tools/blob/master/python-scripts/ Scripts to inspect APU registers and voice buffers]
 +
* Filter information
 +
** [https://de.mathworks.com/help/audio/examples/parametric-equalizer-design.html Something about Parametric Equalizers]
 +
** [https://github.com/kcat/openal-soft/blob/master/Alc/effects/reverb.c Mentions I3DL2 Reverb]
 +
** [https://www.midi.org/specifications/item/dls-level-2-specification DLS2 low-pass filter with resonance and dynamic filter cutoff frequency]
 +
 
 +
 
 +
[[Category:APU]]

Latest revision as of 16:08, 14 July 2019

The MCPX contains an APU (Audio Processing Unit).

The APU consists of 3 main components for audio-processing:

  • VP: A fixed-function block, that generates 32 channel mono audio from voices; the audio is output to the GP MIXBUF.
  • GP: A programmable DSP, it is intended for general-purpose audio processing (programmable audio effects for example).
  • EP: A programmable DSP, it is intended for audio encoding (5.1 AC3 encoding for example).

VP and GP are connected by the MIXBUF, but GP and EP are entirely independent, and no special-purpose memory area connects them. Therefore, the communication between the GP and EP typically happens through programmable DMA transfers (via FIFO or scratch memory).

The GP and EP are based on the same DSP architecture, run at the same clockrate, and have the same functionality (the EP has less memory, and no direct access to the MIXBUF). So, theoretically, nothing prevents the GP from doing EP tasks or vice versa[FIXME].

The APU does only audio-processing but no audio output. Hence, one of the DSPs typically uses programmable DMA to transfer the finished audio to system memory, where it can be read by other components (such as AC97).

All audio processing by the APU is typically done in 24bit PCM at 48000Hz. An APU audio frame is 32 samples long. Therefore, there are 1500 frames per second, with a duration of 0.6ms each. The MIXBUF holds 1024 samples (32 channels * 32 samples/channel).

Glossary

  • PRD = Physical Resource Descriptor (Same thing as SGE?!)
  • SGE = Scatter Gather Entry
  • SSL = Stream Segment List

Frontend Engine (FE)

Voice Processor (VP)

A powerful voice processor. There can be up to 256 voices [1][2] and 64[3] of those can be 3D.

Per-voice settings:

  • Input type (8bit, 16bit, 24bit, ADPCM)
  • 8 target bins, each with controllable volume for this voice
  • Head-related transfer function (HRTF)
  • Low-frequency oscillation (LFO)
  • Pitch (~187.5 Hz to ~12285920.7 Hz)
  • Optionally one of the following filters modes:
    • For 2D Mono:
      • DLS2 Low-Pass
      • Parametric Equalizer
      • DLS2 Low-Pass + Parametric Equalizer
    • For 2D Stereo:
      • DLS2 Low-Pass
      • Parametric Equalizer
    • For 3D:
      • DLS2 Low-Pass + I3DL2 Reverb
      • Parametric Equalizer + I3DL2 Reverb
      • I3DL2 Reverb
  • 2 Envelopes (DAHDSR: Delay, Attack, Hold, Decay, Sustain, Release)
    • Amplitude Envelope
    • Pitch / DLS2 Low-Pass Cutoff Envelope
  • Tracking of certain parameters
    • Volume
    • LFO parameters
    • DLS2 Low-Pass parameters?[FIXME]

There are 32 bins which these voices will be mixed into.

Related APU memory

  • VPV = VP Voices
  • VPHT = VP HRTF Target
  • VPHC = VP HRTF Current
  • VPSGE = VP SGEs
  • VPSSL = VP SSLs

Voice lists

The voices are kept in a single-linked list. There are 3 voice lists:

  • 2D
  • 3D
  • MP (Multipass?)

Voice structure

This is 0x80 bytes

Pitch calculation

The 16 bit signed pitch value (p) can be converted to and from a unsigned frequency in Hz (f) using the following formulas:

p = 4096 * log2(f / 48000)
f = pow2(p / 4096) * 48000

LFO

Tracking

Some of the parameters of the VP can be controlled by setting timing parameters. New values will then be slowly be adapted over time. [FIXME]

Envelopes

There are seperate segments of the envelopes, 2 registers (CUR and COUNT) per envelope keeps track of this and control the envelopes level (LVL):

  • 0: Off = Envelope is not used
  • 1: Delay = Time where envelope stays at 0% until attack
    • COUNT register counts down from DELAYTIME.
  • 2: Attack = Rate at which the envelope goes from 0 to 100%
    • COUNT register counts up to ATTACKRATE.
    • LVL seems to be linear.
  • 3: Hold = Time the envelope stays at 100%
    • COUNT register counts down from HOLDTIME.
  • 4: Decay = Rate at which the envelope goes from 100% to 0%
    • COUNT register counts down from DECAYRATE.
    • The LVL is not linear, it's a curve which drops steep at first and then slowly becomes level[4]
    • The best approximation I could come up with so far is: 255*pow(0.99988799,(DECAYRATE*16-COUNT)*4096/DECAYRATE).
    • When the output level (not LVL!) reaches the sustain level the decay section is over (In my example above, this happens when the output level is less than 0.2 away from the sustain level; so if sustain is 0, the voice would switch to the sustain segment when a value below 0.2 is reached)
    • Writes to the LVL register are ignored
    • Writes to count (any value?) impact the LVL
    • If the COUNT is larger than the decayrate the envelope will switch to the sustain state
    • If the COUNT results in a smaller output level than the sustainlevel the envelope will switch to the sustain state
  • 5: Sustain = Level at which the envelope stays while the voice is being played
    • COUNT register writes are ignored, it will stay at 0
    • LVL register writes are ignored, it will stay at the current sustain level
  • 6: Release = Rate at which the envelope goes from current level to 0%
    • Can start at any time[FIXME]
    • COUNT register starts at RELEASERATE, regardless of the current sustain level
    • COUNT register counts down[FIXME]
    • LVL is not updated during this phase (it will keep it's previous value)
    • Writes to LVL have an impact on the output volume
    • If the COUNT register is higher than the releaserate, the output will be silent and LVL will drop to zero
    • The actual output level is probably determined like: int(COUNT * LVL / (RELEASERATE * 16))[FIXME][FIXME]
    • COUNT will keep counting until 0 even after the output level has hit 0
  • 7: Force Release = Unknown still[FIXME]
    • Seems to happen during invalid conditions? Happened to me when modifying ebo during playback[citation needed]
    • LVL and COUNT seem to be ignored during this, but writes go through? Output level seems to stay at 100% ? (I only got repeating 32 samples during this and the whole Xbox crashed shortly after)

All durations are described using unsigned 12-bit times/rates. The level of sustain is stored unsigned in 8-bit. The COUNT register is stored in unsigned 16-bit.

The 12-bit times/rates are multiplied by 16 when loading them into the 16-bit COUNT register. The COUNT register counts at 1500 Hz[5]. A unit in the COUNT register is therefore 0.6 ms.

The 12-bit values of the envelope sections are given in units of 0.6 ms * 16 = 10.6 ms. This can also be written as 512 / (48000 Hz) = 10.6 ms. The maximum length of an envelope section is therefore 4095 * 10.6 ms = 43.68 seconds.

As the envelope counter runs at a fixed clock speed, it is independent of the voice pitch and duration.

If the Amplitude Envelope COUNT hits 0 during release, DirectSound[FIXME] already deletes the voice, regardless of the Filter Envelope.

The sustain level can be changed during playback. Also the attack register can be changed to a lower value while the counter is counting up, however, if the COUNTER does not compare equal to the set value, it will keep counting, even after an overflow. It will not leave the attack phase and keep counting until it sees value COUNTER / 16 in the attack register. If the attack register is set to a higher value while counting, the volume is going down again. Also, if the attack register value is zero while counting, there won't be any audio output during the attack phase. This indicates that the COUNT register is used to calculate the actual value from the current rates.

The initial state of each envelope can be controlled by the NV1BA0_PIO_VOICE_ON command. It can either be: DISABLE, DELAY, ATTACK or HOLD.

Amplitude Envelope

The amplitude envelope is mixed with the volume during mixing. The volume registers are not modified. [FIXME] It is not yet known how many bits of the envelope state are used.

Filter Envelope

[FIXME]

The pitch scale is multiplied with the current envelope state and added to the current pitch during mixing. The pitch registers are not modified.

f = 2^((signed_pitch+signed_pitch_mod*32*envelope_state_float)/4096)*48000 # envelope_state_float: [0, 1]

It is not yet known how many bits of the envelope state are used.

Filters

DLS2

Formulas from DirectSound

FreqToHardwareCoeff(frequency): # Input in Hz
  if (frequency < 30) { return 0x8000 }
  if (frequency > 8000) { return 0x0000 }
  FC = 2 * sin(PI * frequency / 48000)
  octaves = 4096 * log2(FC)
  return octaves & 0xFFFF
hardware_coefficient[0] = FreqToHardwareCoeff(frequency)
dBToHardwareCoeff(resonance): # Input in dB
  resonance = min(resonance, 22.5)
  Q = pow(10, -0.05 * resonance)
  return min(0xFFFF)
hardware_coefficient[1] = dBToHardwareCoeff(resonance_in_db)


Stuff from the DLS2 spec:[FIXME]

There are 2 coeffiecents per channel:

  • F_c (Cutoff frequency)
  • resonance

From Page 8 of "DLS 2.2 Version 1.0"[6]

  • b_1 = -2 * r * cos(θ)
  • b_2 = r * r
  • K = g * (1 + b_1 + b_2)
y[i] = K * x[i] - b_1 * y[i-1] - b_2 * y[i-2]

Where y[i-2] and y[i-1] are the last two frames of the output and x[i] the current input.

Operation

Voices are stored in VPV. Input data (from the CPU) is loaded using VPSGE. Voices are then processed and written to the GP MIXBUF.

Global Processor (GP)

The GP is a DSP to do programmable audio processing on the voice bins.

The GP DSP seems to run at 160 MHz.

MIXBUF

The MIXBUF is a 0x400 word (24-Bit, stored as 32-Bit) section. It is split into 32 * 0x20 words. Each 0x20 word block represents one of the 32 voice bins of the VP. The 0x20 words are 24-Bit PCM mono samples to be played back at 48kHz. The duration of each frame is hence 0.6ms.

Memory map

Related APU memory

  • GPS = GP Scratch (?)
  • GPF = GP FIFO

Encode Processor (EP)

The EP is a DSP to encode the audio signal.

Memory map

Related APU memory

  • EPS = EP Scratch (?)
  • EPF = EP FIFO

Usage in DirectSound

This topic deserves it's own article[FIXME]

The bins are used [FIXME] DirectSound allows to load custom GP DSP code for a filter / effects chain. [FIXME] The GP waits for the frame interrupt which signals that MIXBUF data is available. It then goes through the filter chain. At the end of the chain, the GP DSP will verify that the execution didn't take longer than the frame duration.

The GP will then issue 6 DMA requests to output the processed frames to a ringbuffer in scratch space. The frameformat will be the same format as the GP MIXBUF format (also 0x20 words per channel). Each ringbuffer is 0x200 words and therefore holds the last 16 frames. Therefore, the ringbuffer region is 6 * 0x800 Bytes = 0x3000 Bytes in physical memory.

The order of the channels in the ringbuffer is (also DMA order):

The EP maps the same data to its own scratch space. It is assumed that it will DMA this region to its own internal memory. The EP then AC3 encodes the audio data[citation needed] and writes it to the EP FIFO memory[FIXME]. [FIXME] The data is then send to the ACI AC97 using EP FIFO channels 0 (PCM) and 1 (SPDIF)[citation needed]. The EP code is loaded by DirectSound. The EP is not programmable using DirectSound APIs.

Modifications for Boot Animation

During the Boot Animation a different version of DirectSound is used. The EP is disabled in this case. The data is send to the ACI AC97 using GP FIFO channel 0 (PCM). There is no AC3 / SPDIF during the boot animation[7][citation needed].

Related notes