Xbox Input Devices

From xboxdevwiki
Revision as of 16:39, 11 May 2017 by JayFoxRox (talk | contribs) (Fixup Steel Batallion LED fields)
Jump to: navigation, search

Standard Gamepads

Steering wheels

Light guns

Steel Batallion Controller

USB Device Scriptor

From http://www.yaronet.com/topics/154490-steel-battalion-controller-homemade#post-15

bcdUSB:             0x0110
bDeviceClass:         0x00
bDeviceSubClass:      0x00
bDeviceProtocol:      0x00
bMaxPacketSize0:      0x08 (8)
idVendor:           0x0A7B
idProduct:          0xD000
bcdDevice:          0x0100
iManufacturer:        0x00
iProduct:             0x00
iSerialNumber:        0x00
bNumConfigurations:   0x01

ConnectionStatus: DeviceConnected
Current Config Value: 0x00
Device Bus Speed:     Full
Device Address:       0x03
Open Pipes:              0

Configuration Descriptor:
wTotalLength:       0x0020
bNumInterfaces:       0x01
bConfigurationValue:  0x01
iConfiguration:       0x00
bmAttributes:         0x80 (Bus Powered )
MaxPower:             0xFA (500 Ma)

Interface Descriptor:
bInterfaceNumber:     0x00
bAlternateSetting:    0x00
bNumEndpoints:        0x02
bInterfaceClass:      0x58
bInterfaceSubClass:   0x42
bInterfaceProtocol:   0x00
iInterface:           0x00

Endpoint Descriptor:
bEndpointAddress:     0x82
Transfer Type:   Interrupt

Controller to Xbox

// Based on http://steelbattalionnet.codeplex.com/SourceControl/latest#SBC/SteelBattalionController.cs
// See http://steelbattalionnet.codeplex.com/SourceControl/latest#SBC/lgpl-3.0.txt

rawControlData = new Byte[26];

typedef enum {

  RightJoyMainWeapon       = BUTTON_MASK( 2, 0x01),
  RightJoyFire             = BUTTON_MASK( 2, 0x03), //FIXME: WTF?!
  RightJoyLockOn           = BUTTON_MASK( 2, 0x04),
  CockpitHatch             = BUTTON_MASK( 2, 0x10),
  Ignition                 = BUTTON_MASK( 2, 0x20),
  Start                    = BUTTON_MASK( 2, 0x40),
  Eject                    = BUTTON_MASK( 2, 0x08),
  MultiMonOpenClose        = BUTTON_MASK( 2, 0x80),
  MultiMonMapZoomInOut     = BUTTON_MASK( 3, 0x01),
  MultiMonModeSelect       = BUTTON_MASK( 3, 0x02),
  MultiMonSubMonitor       = BUTTON_MASK( 3, 0x04),
  MainMonZoomIn            = BUTTON_MASK( 3, 0x08),
  MainMonZoomOut           = BUTTON_MASK( 3, 0x10),
  FunctionFSS              = BUTTON_MASK( 3, 0x20),
  FunctionManipulator      = BUTTON_MASK( 3, 0x40),
  FunctionLineColorChange  = BUTTON_MASK( 3, 0x80),
  Washing                  = BUTTON_MASK( 4, 0x01),
  Extinguisher             = BUTTON_MASK( 4, 0x02),
  Chaff                    = BUTTON_MASK( 4, 0x04),
  FunctionTankDetach       = BUTTON_MASK( 4, 0x08),
  FunctionOverride         = BUTTON_MASK( 4, 0x10),
  FunctionNightScope       = BUTTON_MASK( 4, 0x20),
  FunctionF1               = BUTTON_MASK( 4, 0x40),
  FunctionF2               = BUTTON_MASK( 4, 0x80),
  FunctionF3               = BUTTON_MASK( 5, 0x01),
  WeaponConMain            = BUTTON_MASK( 5, 0x02),
  WeaponConSub             = BUTTON_MASK( 5, 0x04),
  WeaponConMagazine        = BUTTON_MASK( 5, 0x08),
  Comm1                    = BUTTON_MASK( 5, 0x10),
  Comm2                    = BUTTON_MASK( 5, 0x20),
  Comm3                    = BUTTON_MASK( 5, 0x40),
  Comm4                    = BUTTON_MASK( 5, 0x80),
  Comm5                    = BUTTON_MASK( 6, 0x01),
  LeftJoySightChange       = BUTTON_MASK( 6, 0x02),
  ToggleFilterControl      = BUTTON_MASK( 6, 0x04),
  ToggleOxygenSupply       = BUTTON_MASK( 6, 0x08),
  ToggleFuelFlowRate       = BUTTON_MASK( 6, 0x10),
  ToggleBuffreMaterial     = BUTTON_MASK( 6, 0x20),
  ToggleVTLocation         = BUTTON_MASK( 6, 0x40),

  AimingX                  = BUTTON_MASK( 9, 0xFF),  // Corresponds to the "Aiming Lever" joystick on the right.  X Axis value.

  AimingY                  = BUTTON_MASK(11, 0xFF), // Corresponds to the "Aiming Lever" joystick on the right.  Y Axis value.

  RotationLever            = BUTTON_MASK(13, 0xFF), // Corresponds to the "Rotation Lever" joystick on the left.

  SightChangeX             = BUTTON_MASK(15, 0xFF), // Corresponds to the "Sight Change" analog stick on the "Rotation Lever" joystick.  X Axis value.

  SightChangeY             = BUTTON_MASK(17, 0xFF) // Corresponds to the "Sight Change" analog stick on the "Rotation Lever" joystick.  Y Axis value.

  LeftPedal                = BUTTON_MASK(19, 0xFF), // Corresponds to the left pedal on the pedal block

  MiddlePedal              = BUTTON_MASK(21, 0xFF), // Corresponds to the middle pedal on the pedal block

  RightPedal               = BUTTON_MASK(23, 0xFF), // Corresponds to the right pedal on the pedal block
  TunerDial                = BUTTON_MASK(24, 0x0F), // Corresponds to the tuner dial position.  The 9 o'clock postion is 0, and the 6 o'clock position is 12.
                                                    // The blank area between the 6 and 9 o'clock positions is 13, 14, and 15 clockwise.
  GearLever                = BUTTON_MASK(25, 0xFF), // Corresponds to the gear lever on the left block.
} ButtonEnum;

Xbox to Controller

rawLEDData = new Byte[34];

typedef enum {

  EmergencyEject            = FIELD_MASK(2, 0x0F),
  CockpitHatch              = FIELD_MASK(2, 0xF0),
  Ignition                  = FIELD_MASK(3, 0x0F),
  Start                     = FIELD_MASK(3, 0xF0),
  OpenClose                 = FIELD_MASK(4, 0x0F),
  MapZoomInOut              = FIELD_MASK(4, 0xF0),
  ModeSelect                = FIELD_MASK(5, 0x0F),
  SubMonitorModeSelect      = FIELD_MASK(5, 0xF0),
  MainMonitorZoomIn         = FIELD_MASK(6, 0x0F),
  MainMonitorZoomOut        = FIELD_MASK(6, 0xF0),
  ForecastShootingSystem    = FIELD_MASK(7, 0x0F),
  Manipulator               = FIELD_MASK(7, 0xF0),
  LineColorChange           = FIELD_MASK(8, 0x0F),
  Washing                   = FIELD_MASK(8, 0xF0),
  Extinguisher              = FIELD_MASK(9, 0x0F),
  Chaff                     = FIELD_MASK(9, 0xF0),
  TankDetach                = FIELD_MASK(10, 0x0F),
  Override                  = FIELD_MASK(10, 0xF0),
  NightScope                = FIELD_MASK(11, 0x0F),
  F1                        = FIELD_MASK(11, 0xF0),
  F2                        = FIELD_MASK(12, 0x0F),
  F3                        = FIELD_MASK(12, 0xF0),
  MainWeaponControl         = FIELD_MASK(13, 0x0F),
  SubWeaponControl          = FIELD_MASK(13, 0xF0),
  MagazineChange            = FIELD_MASK(14, 0x0F),
  Comm1                     = FIELD_MASK(14, 0xF0),
  Comm2                     = FIELD_MASK(15, 0x0F),
  Comm3                     = FIELD_MASK(15, 0xF0),
  Comm4                     = FIELD_MASK(16, 0x0F),
  Comm5                     = FIELD_MASK(16, 0xF0),

  GearR                     = FIELD_MASK(17, 0xF0),
  GearN                     = FIELD_MASK(18, 0x0F),
  Gear1                     = FIELD_MASK(18, 0xF0),
  Gear2                     = FIELD_MASK(19, 0x0F),
  Gear3                     = FIELD_MASK(19, 0xF0),
  Gear4                     = FIELD_MASK(20, 0x0F),
  Gear5                     = FIELD_MASK(20, 0xF0),

} LEDEnum;
}

USB Adapters

The Xbox input devices are USB devices. As such, you can connect a keyboard to the Xbox, or a gamepad to your PC. In fact, Linux already has drivers for the gamepad. In order to preserve Xbox hardware, please do not cut OEM Xbox cables to make an adapter. Decent adapters can be acquired cheaply (~$10 USD ea. on 2017.04.30).

Port (From) Plug (To) Link
Xbox USB-A Amazon
USB-A Xbox Amazon