Fatal Error

From xboxdevwiki
Jump to: navigation, search
These are the errors which will be displayed
Fatal Error 13 being displayed
.

Kernel version 3944 is the only known official kernel which doesn't show an error code in the corner[FIXME].

Checked after cold-boot, in this particular order[FIXME]:

Value (2 digit decimal) Step / Condition
07 Harddrive never left busy state (after reset from cold-boot)
09 Setting Harddrive PIO mode failed
09 Setting Harddrive DMA mode failed
08 Harddrive ATA identify device command failed
09 Harddrive is too small for cache partitions
06 Unable to unlock Harddrive
08 Harddrive ATA identify device after unlock command failed
08 Setting Harddrive device parameters failed
10 DVD Drive never left busy state (after reset from cold-boot)
12 Setting DVD Drive PIO mode failed
12 Setting DVD Drive DMA mode failed
11 DVD Drive ATAPI identify device command failed
05 Harddrive not locked; Not reported if either:
  • XBE is allowed to run from unlocked HDD
  • Xbox is in manufacturing region
  • Kernel is made for Chihiro
  • Kernel is made for XDK

Additional error codes, or no precise order known[FIXME]:

Value (2 digit decimal) Generic meaning
00 No error (used internally to clear error flags from EEPROM)
01
02 EEPROM Checksum failure
03
04 RAM bad
13 Dashboard broken, while Kernel/LaunchDataPage reason == 0 (MainMenu)
14 Dashboard broken, while Kernel/LaunchDataPage reason == 1 (Error)
15
16 Dashboard settings error[citation needed]
17
18
19
20 Dashboard failed to launch, but DVD security check was successful
21 Used to manually display fatal error after reboot (on purpose)